4 Queenslander Renovation Ideas

Queenslander houses are some of the most beloved housing styles in the country. It is a style that has continued to evolve with time. Modern builders and designers are today combining upcoming architectural styles with the classic Queenslander. The combination is not only thrilling, but it is also very exciting. It is one of the many things that have made homeowners start looking into how to renovate a Queenslander house.

Dilemmas You are Likely to Encounter When Renovating a House

The Queenslander has a structure that perfectly suits people living in tropical Australian regions. The home is normally built on stilts and then raised off the ground. It comes with a fully covered verandah that helps provide much-needed protection from the weather elements. The interior house designs feature French doors, wooden floors, lots of windows for ventilation purposes, and high ceilings.

Remodeling the Queenslander is not an easy task. The process is likely to get challenging and a bit tricky in some sections. You will need to consider factors such as the building codes and regulations, the local climate, sustainability features, and the homeowner’s lifestyle. The following are ideas you can use to renovate a Queenslander home.

 

1. Connect Your Interiors to Available Outdoor Spaces

Queenslander homes are naturally elevated. The main reason for using this design is to guarantee the occupants’ safety in case of a flash flood. It also helps in drawing up cold air from the ground below the house to help cool the residence during the warm tropical summers.

The downside to living in this type of structure is that it makes it almost impossible for you to create an indoor-outdoor living area. You are, therefore, forced to take the stairs every time you have to get something from the outdoors or the garden.

It is something that can prove scary, especially for parents who have seniors and small children living with them.

 

Pro Tip: Instead of having the kids and the seniors navigate the stairs all the time, you can work with your renovation builders to come up with a simpler solution. This would require you to consider locating the living area, dining, or kitchen on the lower floor. Ensure that the room on this floor has access to your garden or backyard. It is the simplest way to get the indoor-outdoor flow you desire.

 

2. Raise the Ceiling Height of Your Lower Floor

Before you can begin converting the lower floor in your home into a livable area, you will need first to confirm that it has the ideal ceiling height.

When it comes to Queenslander home renovations, you need to make sure that you are following everything prescribed in the Australian building codes, for instance, the code states the ceiling in all habitable areas should have a minimum height of 2.4M.

This applies to bedrooms and living rooms. Laundry rooms and kitchens should have a ceiling height of not less than 2.1M. What this means is that if the lower ceiling measurements do not meet the set height requirements, you will need to re-stump your whole structure.

 

Pro Tip: If your budget allows it, you can work with your builder to raise the structure. Raising it will make it possible for you to construct below it. You will end up with your desired height.

Alternatively, consider converting this space into a garage, wine cellar, or extra storage space. You can work with what you have during your renovation to help save you from incurring variable remodeling costs.

You could also consider constructing a pavilion extension. This kind of addition helps to make it easier to come up with a modern area above, followed by an indoor-outdoor area on the space below.


3. Insulating the Housed Based on Local Climatic Conditions

When renovating old Queenslanders homes, you should note that this design initially originated in Queensland. But this does not necessarily mean that it was limited to this one location.

The architectural style is quite lovely, a factor that has led to its adoption all over Australia. Normally, designers resort to tweaking the structure so that it can fit in with the local climate.

For instance, a Queenslander house located in the tropics ought to have lots of windows. The windows help provide natural ventilation. Its elevation and lightweight structure make it easy for it to release heat more quickly.

The very first Queenslander design made it tricky for builders to construct the residences on the southern parts of Australia. These parts tend to have very chilly weather, especially during the cold seasons.

Your home heater, therefore, ends up working double time. The heated air in the house will escape and get replaced by the cold air coming in through the various leaks in the home.

 

Pro Tip: The solution is to ensure that the structure gets properly insulated. Where possible, seal all the possible leaks. Have your remodeling contractor bring in an accredited home energy auditor. The auditor will assess the overall usage in your house and also perform an insulation check.

You may need to perform a full rehabilitation or replace some of the existing insulation materials to help improve insulation. It is a measure aimed at dramatically reducing the amount of money spent on energy bills.

 

4. Illuminating All Your Under Lit Rooms

Queenslanders tend to have rooms that have been stacked side by side. This is something that mainly applies to houses that have broad floor plans. It is a layout that makes the house appear dark at all times.

You need to make some natural changes to your home layout to open up the dark spaces. Keep in mind that your lower verandah will also not make it easy for light to get into the house.

Pro Tip: You can work with a house designer to borrow some sunlight from the rooms that are already well-lit. Renovated Queenslander homes ought to have strategically placed windows that will help improve the flow of natural light. You could also consider installing some skylights in areas where they can easily get installed. You will need to ensure that the interior gets relayed in a manner that assists in maximizing the amount of natural light available in the house.

 

Do you have any troubles with renovating a Queenslander home? Contact your local home builders to get the right answers then.

No Comments

Post A Comment